News

Instrument hire can reduce capital expenditure and provides access to the latest technology. Alan Hasson from Ashtead Technology explains the benefits when focusing on infrared cameras
Through the identification of problems before they occur, predictive maintenance can save substantial amounts of money and protect plant from lengthy delays and down time. As most equipment gets hot before it fails thermal cameras have an important role to play in spotting potential problems.

Thermal cameras find application within almost every industry. They can be used to perform noncontact inspections by scanning and visualising the temperature distribution of machinery and electrical equipment quickly and accurately. Businesses are then able to locate problems or identify 'hotspots' and avoid any costly operational failures or health and safety hazards.

Cal-Bay Systems announces a powerful PC based rotating equipment monitoring system for recording and analyzing machine-rotating parameters such as vibration levels and frequency, angular speed and rotational displacement.

The REMS-100 system is a cost-effective, integrated machine monitoring solution, using National Instruments hardware and ready to run software. It is supplied as a fully engineered, turn-key system. The REMS-100 base system can be also customized to meet specific customer requirements. Additional services are available for field start-up, installation and system maintenance.

Monitran announces its “Grip Tight” bodied vibration sensors and accelerometers

Monitran, a world leader in the development and manufacture of sensors for the measurement of vibration and displacement, has made its general purpose vibration sensors and accelerometers available as “Grip Tight” (GT) versions. With Grip Tight (patent pending), the fitting or removal of a sensor to/from its GT stud takes mere seconds - yet the mechanical bond, essential for the transfer of energy, is assured.

Monitran’s Group I intrinsically safe sensors are awarded ANZEx for use in mining applications in Australia and New Zealand.

All of Monitran’s Group I intrinsically safe accelerometers and velocity transducers have been approved by certification body Simtars to ANZEx for use in mining applications throughout Australia and New Zealand. This certification is in addition to the (EU) ATEX and (International) IECEx approvals Monitran’s Group I sensors already possess.

Andy Anthony, Monitran’s Operations Director, comments: “Many countries, whilst acknowledging international standards like IECEx, still impose their own standards for certain applications. We sought ANZEx in response to requests from end-users based in Australia and New Zealand, and companies based elsewhere wishing to supply machinery into these countries.”

Monitran’s Group I intrinsically safe sensors are awarded ANZEx for use in mining applications in Australia and New Zealand.

All of Monitran’s Group I intrinsically safe accelerometers and velocity transducers have been approved by certification body Simtars to ANZEx for use in mining applications throughout Australia and New Zealand. This certification is in addition to the (EU) ATEX and (International) IECEx approvals Monitran’s Group I sensors already possess.

Andy Anthony, Monitran’s Operations Director, comments: “Many countries, whilst acknowledging international standards like IECEx, still impose their own standards for certain applications. We sought ANZEx in response to requests from end-users based in Australia and New Zealand, and companies based elsewhere wishing to supply machinery into these countries.”

Monitran’s Group I intrinsically safe sensors are awarded ANZEx for use in mining applications in Australia and New Zealand.

All of Monitran’s Group I intrinsically safe accelerometers and velocity transducers have been approved by certification body Simtars to ANZEx for use in mining applications throughout Australia and New Zealand. This certification is in addition to the (EU) ATEX and (International) IECEx approvals Monitran’s Group I sensors already possess.

Andy Anthony, Monitran’s Operations Director, comments: “Many countries, whilst acknowledging international standards like IECEx, still impose their own standards for certain applications. We sought ANZEx in response to requests from end-users based in Australia and New Zealand, and companies based elsewhere wishing to supply machinery into these countries.”

Bombardier Transportation has its global headquarters in Berlin, Germany with a presence in over 60 countries. It has an installed base of over 100,000 vehicles worldwide. The Group offers the broadest product portfolio and is recognized as the leader in the global rail sector.

Within the UK Bombardier has established a world class engineering maintenance and repair site based at Crewe, the historic railway engineering town established by the Midland Railway in 1839.

By:  Ernesto Wiedenbrüg, Baker Instrument Company, an SKF Group Company

Introduction:
Gone are the days when a MegOhm meter and a digital multi-meter were the main tools in electrical maintenance.  Advances in technology now offer engineering professionals both off-line and on-line (real time) instruments to verify the health of rotating machinery.  

Modern on-line technologies permit assessment of the ‘whole motor system’, which is comprised of three components:  power, motor & load.  By focusing on these three components, troubleshooting now becomes truly predictive!

By:  Ernesto Wiedenbrüg, Baker Instrument Company, an SKF Group Company

Introduction:
Gone are the days when a MegOhm meter and a digital multi-meter were the main tools in electrical maintenance.  Advances in technology now offer engineering professionals both off-line and on-line (real time) instruments to verify the health of rotating machinery.  

Modern on-line technologies permit assessment of the ‘whole motor system’, which is comprised of three components:  power, motor & load.  By focusing on these three components, troubleshooting now becomes truly predictive!

Air Bearings Ltd (ABL) of Poole, Dorset, are Queen’s Award winners for Export and Innovation in the design and manufacture of high speed air bearing spindle motors. Their use of the Whitelegg Baker AWA 2.2 analyser enables rapid testing of each motor ensuring total quality control.

Non contact bearing systems offer significant advantages over other low friction devices. In an air bearing the surfaces in motion are separated by a thin film of pressurised air acting under the laws of physics.