Need equipment for your cooling process or new air conditioning project?
We can help. For the past 15 years ICS has been supplying and installing the UK
News
New services include DrivesActive, which provides 24/7 support, while DrivesActive+ is a lifecycle management programme for critical equipment. D
rivesAdvantage completes the new service portfolio with installation, start-up and after-sales support. In terms of software, the catalogue details integration and programming tools, start-up and maintenance tools, as well as engineering tools.
A faxback form enables readers to request further information, such as fact files and technical guides on subjects such as energy efficiency, harmonics and bearing currents.
The ABB Drives & Motors Catalogue 2007 is free on request from ABB’s freephone Brochureline on 0800 783 7491
New services include DrivesActive, which provides 24/7 support, while DrivesActive+ is a lifecycle management programme for critical equipment. DrivesAdvantage completes the new service portfolio with installation, start-up and after-sales support. In terms of software, the catalogue details integration and programming tools, start-up and maintenance tools, as well as engineering tools.
A faxback form enables readers to request further information, such as fact files and technical guides on subjects such as energy efficiency, harmonics and bearing currents.
The ABB Drives & Motors Catalogue 2007 is free on request from ABB’s freephone Brochureline on 0800 783 7491
FUCHS supplies a range of premium quality machine shop lubricants.
Food Grade Lubricants
The use of USDA-H1 food grade lubricants is becoming more widespread in the UK, brought about by stricter food lubricant legislation, continuing health scares in the food industry and a greater awareness as to the efficiencies that USDA-H1 lubricants can offer.
Introduction
The R.S. Clare range of advanced Valve Lubricants for the Oil & gas Industry has been developed in conjunction with Original Equipment Manufacturers and Production, Drilling and Service operators.
R.S. Clare's valve lubricants have been well proven in the field providing the user with 'failsafe' and 'cost effective' valve lubrication.
In the exploration and production of crude oil & natural gas, severe problems can be encountered due to the presence of H2S, CO2, condensate, hydrocarbon solvents, acids and other chemicals present in the well production system.
Thermoteknix Leading Infrared Analysis, Reporting and Asset Management Software for all Major Camera
Thermoteknix has solved this major problem for all infrared camera users with an Industry First. The latest release of Thermoteknix’ leading thermal image processing and reporting package, TherMonitor® Reporter, and its asset based Condition Monitoring system, Condition RED® are fully compatible with the largest installed base of infrared camera users in the world. Now, thermographers can have a choice of software supplier and have seamless integration of all their images with access to these time-saving image processing and invaluable tools – regardless of which camera they have bought, or are planning to buy in the future. Thermoteknix analysis software now supports all the major infrared camera brands, including all FLIR Systems, Inframetrics, Agema, Avio and of course, Thermoteknix.
Thermoteknix has long been recognised as the leading developer and innovator in the field of thermal imaging software due to its powerful and unique list of features, reporting capabilities and ease-of-use. Thermoteknix’ TherMonitor® Reporter is a fully featured thermal analysis and reporting package which includes thermal and visual images with direct integration into Microsoft Word for industry compatible reporting.
Thermoteknix’ Condition RED® is available in both Stand-alone PC and integrated VisIR® camera versions. The Condition RED® PC version supports all FLIR Systems image file formats (past and present) including E, P, PM and B series cameras, Agema, and Avio and provides image viewing and organizing, temperature measurement and full analysis, reporting and extensive route planning and asset database all in one easy to use package.
Thermoteknix Systems Ltd
Teknix House, 2 Pembroke Avenue, Waterbeach, Cambridge CB5 9QR
Contact: Peter Harvey, Sales Manager
Tel: 01223 204000 Fax: 01223 204010
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Vibration is the response of a system to an internal or external stimulus causing it to oscillate. While it is commonly thought that vibration itself damages machines, it does not. Instead it is the damage done by dynamic stress that causes fatigue of the materials: the dynamic stresses are caused by vibration. That is to say that different machines have a different toleration to vibration.
There are literally hundreds of specific problems that can cause a machine to exhibit excessive vibration. To locate the root cause of vibration an analysis of the vibration is required. The forces that cause vibration are usually generated through the rotating motion of the machine's parts or electrical supply frequency. When a fault condition occurs the problem will exhibit characteristics that are directly related to these frequencies.
The doseBadge is the unique way to measure Occupational and Industrial noise exposure. Different to a traditional Noise Dosemeter, the doseBadge has no cables or buttons, and is controlled, via an InfraRed link, from the RC:110A Reader unit.
The doseBadge has no buttons or controls and is contained in a robust metal case which prevents damage to the unit. The doseBadge logs, measures and stores noise data throughout the measurement and this data is downloaded to the Reader unit for review and analysis.
By eliminating cable and controls from the doseBadge, the user can be sure that the person being measured cannot have tampered with the measurement and that the data is valid. The CR:110A version of the doseBadge has been designed to meet the needs of the new EU Physical Agents (Noise) Directive as well as a range of other noise measurement standards.
BEKO BECOMES NEW EVERAIR ASSOCIATE
Beko Technologies have recently become the joint largest shareholder in EverAir Technology GMBH. Pro-Air Engineering, a compressed air and systems provider in China and Taiwan with over 200 employees is also a partner in the deal.
Based in Hilden, Germany, EverAir is a young and innovative company specialising in the development and construction of equipment used for compressed air and technical gas processing- in particular in the area of large adsorption dryers.
EverAir is managed by Herbert Blauscheck and Frank Mueller, who between them have more than 50 years experience in the compressed air industry, latterly for many years working for Ultrafilter. With their expertise and experience Beko can claim to have access to the foremost authorities on adsorption drying in Germany, if not the whole of Europe.
Structural bonding as an alternative to mechanical fixing, riveting or welding has become increasingly popular amongst engineers in recent years. New technical advances and the development of new bonding solutions have dramatically improved the performance of structural adhesives. These improvements have led to a reduction in the time it takes to repair plant and machinery, manufacture goods, and improve finished end products. All of these benefits have contributed to the dramatic take up of structural adhesives particularly in the metal, plastics, composites and wood bonding applications.