News

When Triumph Motorcycles required a new seal within a three month lead time they turned to Pioneer Weston International, a division of ERIKS UK to develop and supply the seal.

The design and purchasing teams at Triumph Motorcycles needed help when extreme pre-production testing of prototypes of a new model revealed that enhanced sealing for the gearbox output shaft would improve performance and reliability.

Faced with the challenge of sourcing the custom designed and manufactured seal on a short time scale,  the engineers at Triumph Motorcycles turned to an organisation which not only had proven expertise in seals, but also an excellent reputation for providing a fast response

With the continuing increase in energy costs and with many fixed price deals currently coming to an end there has never been a greater emphasis on reducing energy bills in the FM sector. Facilities managers and facilities management (FM) companies can now cut costs and increase efficiency by making use of the new and comprehensive support package being offered by ERIKS Electro-Mechanical Services, part of ERIKS UK, a corporate member of the British Institute of Facilities Management.

Specifically designed to complement facilities management operations, the package draws on the enormous product portfolio, resources and expertise of ERIKS to go far beyond the simple repair services offered by other support companies.

With the continuing increase in energy costs and with many fixed price deals currently coming to an end there has never been a greater emphasis on reducing energy bills in the FM sector. Facilities managers and facilities management (FM) companies can now cut costs and increase efficiency by making use of the new and comprehensive support package being offered by ERIKS Electro-Mechanical Services, part of ERIKS UK, a corporate member of the British Institute of Facilities Management.

Specifically designed to complement facilities management operations, the package draws on the enormous product portfolio, resources and expertise of ERIKS to go far beyond the simple repair services offered by other support companies.

This PMN pressure switch is the original and still the best with many thousands in use by OEM's worldwide. Prices start at just

Besides the required compressed-air quality, great importance was attached to an absolutely reliable plant control and data transmission, as the system operates continuously and without supervision.

 The dryer is controlled by a PLC (programmable logic controller). All process data is indicated at the control cabinet and transmitted to the primary control unit via "Ethernet".  The electrical control was designed in close cooperation with the plant operator, in accordance with the in-house standard of the facility.

There were no issues at all after one year, on the occasion of the preventive maintenance. All the customer’s requirements were met or exceeded, and the required compressed-air quality supplied.

"The hopes we placed on EverAir, a company of the Beko group were entirely fulfilled", commented the customer. " We activated the plant and, afterwards, we could forget about it,  so to speak."

The dryer supplies a volume of 5,500 Nm?/h with a pressure dew point of -40 °C. Compressed air which is not required for the application is fed into the general operational network for the shop air.

The imperative in industry to cut energy costs and reduce green house gases is good news for suppliers of high efficiency motors. However, the projected efficiency gains from using EFF1 or 2 type machines will not be achieved if motor system and supply problems that existed before they were installed are not resolved. One of the most common of these is low power factor.

Motors operated with low power factors are expensive and inefficient. In the worst cases this can result in utility supply companies having to increase their generation and transmission capacity to handle the reactive power component caused by inductive loads. There is a price for this: in the UK, the threshold value for power factor is 0.85, below this figure industrial users are generally charged more by their suppliers.

The imperative in industry to cut energy costs and reduce green house gases is good news for suppliers of high efficiency motors. However, the projected efficiency gains from using EFF1 or 2 type machines will not be achieved if motor system and supply problems that existed before they were installed are not resolved. One of the most common of these is low power factor.

Motors operated with low power factors are expensive and inefficient. In the worst cases this can result in utility supply companies having to increase their generation and transmission capacity to handle the reactive power component caused by inductive loads. There is a price for this: in the UK, the threshold value for power factor is 0.85, below this figure industrial users are generally charged more by their suppliers.

The new belt tension tester from Econobelt uses sound waves instead of force deflection to accurately measure tension. The portable, lightweight and easy-to-use meter produces repeatable results for any operator. It can be used in almost any environment and produce fast results, calculated in seconds. The unit, identified as the 507C runs on four AAA batteries.

The Model 507C comes with a cord sensor. Optionally available are an inductive sensor or a flexible sensor, and a cord sensor. At the new Econobelt eStore you can get immediate quotes, download a 3D model, and place online orders.

The new belt tension tester from Econobelt uses sound waves instead of force deflection to accurately measure tension. The portable, lightweight and easy-to-use meter produces repeatable results for any operator. It can be used in almost any environment and produce fast results, calculated in seconds. The unit, identified as the 507C runs on four AAA batteries.

The Model 507C comes with a cord sensor. Optionally available are an inductive sensor or a flexible sensor, and a cord sensor. At the new Econobelt eStore you can get immediate quotes, download a 3D model, and place online orders.

The new belt tension tester from Econobelt uses sound waves instead of force deflection to accurately measure tension. The portable, lightweight and easy-to-use meter produces repeatable results for any operator. It can be used in almost any environment and produce fast results, calculated in seconds. The unit, identified as the 507C runs on four AAA batteries.

The Model 507C comes with a cord sensor. Optionally available are an inductive sensor or a flexible sensor, and a cord sensor. At the new Econobelt eStore you can get immediate quotes, download a 3D model, and place online orders.