Holroyd Instruments Ltd draw upon AE experience stretching all the way back to 1974 when Trevor Holroyd (the founder of the company) started his research in this field in the prestigious Advanced Research Labs of Rolls Royce. Both fundamental research and development of Airline and Shop-Floor applications continued until in 1991 he left Rolls-Royce and set up Holroyd Instruments.
This background formed an excellent starting point from which to develop the unique AE sensor and AE signal processing upon which the MHC series of products are based. The first of these, the MHC - Machine Health Checker, was launched in 1993 and immediately carved out a reputation for being able to pick up machine faults even when other CM instruments failed.
The story of the MHC is one of initial scepticism that anything so simple could really work in the industrial environment. The phenomenon of the MHC is its ability to time and again cause such scepticism to evaporate as soon as it is seen in use detecting the presence of faults and localising their position.
The Flir E-320 camera is a compact, battery-powered unit that weighs less than 800 grams and is sealed to IP54 (no ingress or moisture) making it an ideal portable, go anywhere tool for both indoor and outdoor use in all weather conditions. The camera also features a real-time scanning rate of 50Hz (which means the image won 
The Ex-PORT range of IR Sightglasses/Windows from Hawk IR has been certified for use in Zone 1 and Zone 2 hazardous areas. The Ex-PORT is understood to be the first of its kind to get such certification, confirming Hawk IR's status as a world leader in electrical thermography.
At EDMR we are able to repair all of the following types of motors. Since being established in 1988 our focus has been to be the leading independent repairer of specialist motors as well as standard AC induction motors. Each motor type has a dedicated workshop facility with the requisite hardware, software and test rigs. 
Rolls Royce has taken delivery of the first AIRdeck intelligent access platforms from work at height specialist Planet Platforms.
Penloc ZT is a high performance threadlocker designed to work in temperatures ranging from -55C to +150C. ZT will cure to handling strength in 5 - 20 minutes dependant on temperature and will be fully functional in 45 minutes.
Putting together the compressed air jigsaw can be a puzzling experience! Sifting through the various puzzle pieces, analysing them in turn and then trying to find their place in relation to the big picture takes time and resource.
BABCOCK WANSON are specialists in industrial coil boilers offering a range of steam generators from 150 to 8000 Kg/h with operational pressures from 5 to 50 bar. The water volume is low and flows directly proportional to the desired steam output using a positive displacement water feed pump. In the high pressure HPVAP Series 100 bar is possible in a closed loop thermosyphon pumpless design offering very high overall plant efficiency without pressure vessels and suitable for a range of batch and variable process flow applications particularly in edible oil processing.
Latest Release Features Enhancements to Call Center, Mobile, Budgeting, GIS