SVANTEK LAUNCHES NEW INTRINSICALLY SAFE SV104 PERSONAL NOISE DOSIMETER
ATEX and IECEx approvals means well-proven instrument can now be used in potentially explosive atmospheres including mines and petrochemical plants.
World leading manufacturer of occupational health and environmental noise and vibration monitoring instrumentation – has launched the new ATEX and IECEx Intrinsically Safe (IS) SV104 personal noise dosimeter for use in potentially (Read More)
ExVeritas, a UKAS and IECEx accredited Test Laboratory have also become UKAS accredited as a Certification Body and a ‘ATEX Notified Body’ under the ATEX Directive.
Sean Clarke, Managing Director of ExVeritas, commented “we are delighted to have achieved notification from the UK Secretary of State and to be able to offer a direct route to all types of ATEX Product and Quality System Certificates to our growing customer base”.
Exveritas are also launching their unique online ‘Certification Management System’ (CMS) which will allow customers to log on to the system to request and track quotes, track certification projects in real time, request fast certificate concessions or variations and view all of their certificates and reports. The system will also automatically inform customers if Standards used for their product certification change or are withdrawn, simplifying their ongoing compliance management for CE Marking.
E2S Warning Signals, the world’s largest independent manufacturer of audible and visible warning devices, design and manufacture a large number of different sounders, beacons and call points for use in onshore and offshore hazardous areas. At the end of March the company will be showcasing its product ranges at two exhibitions some 8000 km apart.
From 26 – 28 March at the China International Petroleum and Petrochemical Technology and Equipment Show (CIPPE) in Beijing, the main feature on Stand W1002E will be the new BEx explosion proof radial horn and strobe combination, a four-stage, 123 dB(A) 45 tone device combined with a 21 Joule strobe in a single housing. Available in both EEx d and EEx de ratings, approved for use in gas Zones 1 and 2 and dust Zones 21 and 22, the new design of output horn turns the sound 90 degrees into a radial, omni-directional pattern without reducing the unit’s sound output levels, providing uniform sound distribution. Also featured on the booth is the full range of explosion proof, intrinsically safe and marine approved warning devices.
With a system that was specifically developed for the monitoring of the compressed-air quality in the medical field, BEKO TECHNOLOGIES extends its METPOINT® measuring range. The new device for the quality assurance of medical gases boasts unique features, such as permanent auto calibration and special technology for the increased operational reliability and long-term stability of the measuring cells.
METPOINT® MMA from BEKO TECHNOLOGIES allows for the uninterrupted 24-hour monitoring of the sensitive medical gases, and the medical compressed air which is crucial to patients' safety.
Measurement technology makes the purity of compressed air visible and points out the optimisation potentials in the system. The measurement instrumentation from BEKO TECH-NOLOGIES provides a reliable data base for the assessment and assurance of the compressed-air quality and for the identification of hidden cost drivers.
The METPOINT sensor technology continuously records all the relevant parameters at the critical control points of compressed air – reliably and precisely. The proper means in order to implement energy management, for example in accordance with ISO 50001, or to meet the demanding HACCP or GMP requirements.
BEKO TECHNOLOGIES introduced the METPOINT BDL data logger, Now it´s little brother“, the METPOINT BDL compact, is released.
The METPOINT® BDL compact data logger allows for the connection of 2 - 4 transducers or sensors in a user-defined manner. With pressure transducers, for example, or with pressure dew point transmitters, volume-flow sensors, temperature sensors, clip-on ammeters, etc. Four limit values on the whole can be freely defined and assigned to two different alarm relays.
At the device, the measured values are indicated on a 3.5" colour display with a zoomable touch panel. It allows for tabular, graphic, and combined presentations. Saving potentials become transparent via daily, weekly, and monthly reports. Any exceeded limits are highlighted in red. An early detection of deviation from set parameters secures highest precision and process safety.
BEKO TECHNOLOGIES are pleased to announce that from 1st January 2015 we are offering an extended 5 year warranty as standard with the DRYPOINT RA refrigeration dryers. In addition to this we will not be increasing our prices on the dryers this year.
We believe that our DRYPOINT RA refrigeration dryers are reliable, perform well to different specifications and are easy to maintain via good information from the control system, and also give customers the lowest cost of ownership. They are also environmentally friendly with the R407C refrigerant which has significantly lower GWP ( Global Warming Potential) and are low in energy consumption.
With a data logger which was specifically developed for the employment in compressed-air plants BEKO Technologies extends its METPOINT® measurement equipment family. The new device boasts a multitude of application-specific capabilities, stretching from the number of connectable transducers to software specifically for the analysis of compressed-air processing.
The METPOINT® BDL data logger allows for the connection of up to eight or even 12 transducers or sensors, depending on the model. With this capacity the new device distances itself from standard data loggers which, in most cases, do not allow for such an option.
Sensors combined in a user-defined manner can be assigned to the numerous connections of the METPOINT® BDL. With pressure transducers, for example, or with pressure dew point transmit-ters, volume-flow sensors, temperature sensors, clip-on ammeters, etc. 32 limit values on the whole can be freely defined and assigned to four different alarm relays. An automatic early warning guarantees the utmost precision and process safety. At the device, the measured values are indicated on a 7" colour display with a zoomable touch panel.
BEKO TECHNOLOGIES introduced the METPOINT BDL data logger, Now it´s little brother“, the METPOINT BDL compact, is released.
The METPOINT® BDL compact data logger allows for the connection of 2 - 4 transducers or sensors in a user-defined manner. With pressure transducers, for example, or with pressure dew point transmitters, volume-flow sensors, temperature sensors, clip-on ammeters, etc. Four limit values on the whole can be freely defined and assigned to two different alarm relays.
At the device, the measured values are indicated on a 3.5" colour display with a zoomable touch panel. It allows for tabular, graphic, and combined presentations. Saving potentials become transparent via daily, weekly, and monthly reports. Any exceeded limits are highlighted in red. An early detection of deviation from set parameters secures highest precision and process safety.
BEKO TECHNOLOGIES announces the launch of its own official YouTube Channel. This channel showcases videos about our company and about the products from our compressed air treatment and compressed air measurement portfolio. We are excited that we now feature a leading social media platform in our company communication. Viewers are invited to give us their feedback in the comments.
Link to the English channel:
https://www.youtube.com/channel/UCoC6z7J7XfVw9fTH3YBMEsg
