Energy and fuel conservation has been one of the worlds most talked about topics for a number of years. Whether it be the need to conserve fuel and increase the MPG from your car, or simply turning off the lights and appliances when you go to bed to save energy, companies, organisations and governments the world over are all pushing efficiency initiatives and their green credentials. This drive has stimulated the growth of innovations for UK based manufacturer Midland-ACS.

Utilising research into the marketplace and assessments of client demands their new 70 series valve has been engineered to provide customers with higher flow rates, while at the same time consuming less power than both traditional solenoids and competitor valves alike. Using 316 stainless steel in the body construction to offer maximum internal and external protection from liquid and gases the 70 series is a direct-acting 3/2 hazardous area solenoid valve for the oil, gas and petrochemical industries. Designed for actuator control the 70 series is available with connections from ?” – ?”NPT and is EExd IIC T6 with IP67 Ingress Protection classified, for use in hazardous environments. Compliant with the ATEX directive and entitled to bear the CE mark, the valve is also IECex certified.

A key element of the design process was to deliver exceptional efficiency in terms of energy usage. With views for offshore usage and the power issues these installations and vessels have regarding the amount of wattage they use, Midland-ACS set themselves the task to better a power consumption rate of 5 watts. Through various trials and tests a final power consumption figure of 3.5 watts at an ambient temperature of -50°C to +60°C was achieved, almost halving their original benchmark.

Compact, reliable and of increasing importance to offshore facilities and operations, lightweight at only 3.2 kilos, the valve design removes the potential for leaks and reduces the risk of hazardous contamination.

Available in 12v, 24v, 110v DC options and 24v, 110v, 230v AC options, this direct-acting solenoid valve has already been incorporated into a manifold solution and at time of writing Midland-ACS were into the late stages of testing the 250 bar hydraulic version to complement an ever widening range of Midland-ACS valves.

For further information contact:
Midland-ACS,
www.midland-acs.com
Tel: +44 (0)1902 305678
Fax: +44 (0)1902 305676